Pitched roofs

Bay Window Roof Replacement: Porch and Bay Roof Costs, Lead vs Tiles vs EPDM

What porch and bay window roofs cost to replace in 2026, which covering to pick, and why they leak in the first place.

By the Roofz team8 November 202610 min read

Ink and watercolour drawing: Leo the roofer fitting lead over a small bay window roof on a Victorian brick house
Leo on the job.

A bay window roof replacement costs somewhere between £350 and £3,500 in 2026, and the covering you pick decides most of that.

Felt and EPDM rubber are the cheap end, GRP fibreglass sits in the middle, and tiles, slate and proper lead are the top end.

Most people pay around £1,000 to £2,200 for a like-for-like job.

A porch roof is in the same sort of bracket, from about £600 for a simple flat canopy up to £3,500 or more for a pitched, tiled one.

These little roofs take a lot of water for their size, and when they go, the leak turns up inside the bay or over the front door.

Here's what they cost, what to cover them with, why they fail, and when you need permission.

How much does a bay window roof replacement cost?

Two 2026 price guides give different ranges, which is normal, because they average a lot of different jobs from all over the country.

MyJobQuote's 2026 guide puts a typical straightforward job at around £980, with an overall range of £350 to £2,350.

Bestbuilders' 2026 guide comes in higher, saying most homeowners spend £1,200 to £2,200 like for like, with lead running to £3,500 or more.

Here they are side by side.

CoveringMyJobQuote 2026 (2m² to 6m² bay)Bestbuilders 2026 (fitted)Cost per m² installed (MyJobQuote)
Felt£350 to £730£700 to £1,300£50 to £80
EPDM rubber£410 to £850£1,000 to £1,900£80 to £100
GRP fibreglass£490 to £1,350£1,200 to £2,500£120 to £180
Slate or tiles£890 to £2,200Not priced£95 to £275
Lead£980 to £2,350£1,800 to £3,500+£140 to £250

The Bestbuilders numbers include access and deck repairs, which is a big part of why they're higher.

Your price comes down to three things: how big the bay is, what state the timber is in underneath, and whether it needs a scaffold.

Where the money goes

Bestbuilders breaks a lead bay down like this.

  • Sheet lead: £350 to £800.
  • Deck and timber: £150 to £400.
  • Skilled leadwork labour: £900 to £1,800.
  • Access: £200 to £450.

On an EPDM bay, the same guide puts the membrane and glue at £120 to £280 and the labour at £550 to £950.

So with lead, you're mostly paying for the skill, not the metal.

For reference, the Lead Lads' trade page had rolled lead at £2.81 per kg in May 2026.

Extras that catch people out

ExtraTypical costSource (2026)
Scaffold for a first-floor bay or over a porch£150 to £600Bestbuilders
Waste removal£200 to £400 (often included)MyJobQuote
Timber deck replacement£25 to £35 per m²MyJobQuote
Lead flashing replacement£200 to £425MyJobQuote
Rotten boarding or fascia£100 to £400Bestbuilders
Patch repair to a split or failed flashing£150 to £450Bestbuilders

MyJobQuote puts a roofer's day rate at around £200 to £275, and lead or slate work usually costs more because it's specialist.

Roofz guide

Porch and bay window roof replacement

What it costs in 2026, what to cover it with, and why these small roofs leak

The headline numbers

£350-£3,500

Bay window roof replacement, cheapest felt to lead

£1,000-£2,200

What most people pay like for like

£600-£1,500

Flat porch canopy, VAT included

£1,500-£3,500+

Pitched, tiled porch roof

Bay roof cost per m² installed (top of range)

Slate or tiles£95-£275
Lead£140-£250
GRP fibreglass£120-£180
EPDM rubber£80-£100
Felt£50-£80

How long each covering lasts (top of range)

Slate80-150 years
Lead60-80+ years
EPDM25-50+ years
GRP20-30 years
Felt10-25+ years

Lead, tiles or EPDM?

Lead

  • Right look for period bays
  • Code 5 for moderate bays
  • Needs skilled detailing
  • Scrap value attracts thieves

Tiles or slate

  • Matches the main roof
  • Suits small pitched porches
  • Weak spots at cuts and hips
  • Wall flashing is critical

EPDM rubber

  • One sheet, no seams
  • Fitted in a day or two
  • Best for flat bays and canopies
  • No scrap value

A proper job, in order

  1. Strip it. Old covering, flashings and fixings off.
  2. Check the timber. Rotten wood out, not covered over.
  3. New deck. Exterior-grade ply where needed.
  4. Lay the covering. Lead on underlay, EPDM as one sheet.
  5. Flash the wall. Where the roof meets the wall or sill.
  6. Finish off. Gutters checked, waste cleared.

Before you sign a quote

  • Ask how they'll check the deck underneath
  • Get the lead code or membrane named
  • Check the wall flashing is included
  • Ask if scaffold (£150-£600) is in the price
  • Check conservation area rules on a front bay
  • Get one fixed price in writing with a guarantee

ROOFZ - roofz.co.uk

Sources: MyJobQuote bay window roof replacement and porch guides (2026); Bestbuilders bay roof and porch roof guides (2026); The Lead Lads; Planning Portal; East Suffolk Council. Prices are national guide ranges; a Roofz survey gives a fixed figure.

Share this infographic

Free to use on your own site. Copy the code below and paste it into your page.

How much does a porch roof replacement cost?

Porch roofs come in two shapes: a flat canopy, or a small pitched roof with tiles on.

Bestbuilders' 2026 porch guide, VAT included, puts a simple flat canopy in felt, GRP or EPDM at around £600 to £1,500.

A full pitched, tiled porch roof runs about £1,500 to £3,500 or more, and more again if the walls or the lintel need sorting.

For materials alone, MyJobQuote's 2026 porch guide says 3m² of plain clay tiles costs about £145 to £450, and rubber roofing about £80 to £120 per m², before labour and timber.

Lead vs tiles vs EPDM: which is best for a bay or porch roof?

There's no one right answer, but each one suits a different house and a different budget.

Lead

Lead is the traditional covering for bays on Victorian and Edwardian houses, and on those houses it looks right.

MyJobQuote gives lead 80 years or more, and Bestbuilders says 60 plus.

But it only lasts if it's done properly: right thickness, sensible bay sizes, an underlay underneath, and room to move.

The Lead Lads' guide to lead codes recommends Code 4 for general flashings, Code 5 for moderately wide bays and Code 6 for flat roof bays on exposed sites.

Thin lead, big sheets and too many nails is a bodge, and it'll split.

Lead also has scrap value, and Roofing Supplies UK notes that homes have become targets for opportunist thieves, which is why some people go for an alternative.

More on that in our guide to lead flashing repair.

Tiles or slate

Some bays and most pitched porches have a little hipped or lean-to roof in tiles or slate to match the house.

MyJobQuote puts slate at 80 to 150 years, so the slates themselves aren't the problem.

The weak spots are the small cuts, the hips and the flashing against the wall, and on a roof this small there's no room for sloppy work.

EPDM rubber

EPDM is one sheet of synthetic rubber, so on a small flat bay or porch canopy there are no seams to fail.

That's why it's our go-to for flat bays.

Bestbuilders gives EPDM 25 to 40 years, while MyJobQuote quotes manufacturers' claims of 50 years or more.

It goes on in a day or two, and nobody's nicking it for scrap.

Our rubber roofing cost guide has the full story.

GRP fibreglass and felt

GRP gives a hard, seamless finish and moulds round awkward shapes, and Bestbuilders puts it at 20 to 30 years.

Felt is the budget job, and Bestbuilders gives a basic felt re-cover about 10 to 15 years, though MyJobQuote says certified felt systems can reach 25 or more.

MaterialLifespan (2026 guides)Best forWatch out for
Lead60 to 80+ yearsPeriod bays, conservation areasCost, theft, needs skilled detailing
Slate80 to 150 yearsMatching a slate main roofSmall cuts and wall flashings
EPDM25 to 50+ yearsFlat bays and porch canopiesLooks modern on a period front
GRP20 to 30 yearsAwkward shapes, hard-wearing finishNeeds dry weather to lay
Felt10 to 25+ yearsTight budgetsShorter life than the others

Torn between the two flat options? Our guide to fibreglass roof costs puts GRP and EPDM head to head.

Why do bay and porch roofs fail?

A bay roof sits right under the upstairs window and catches everything that runs off it.

The Lead Lads list the usual faults on old lead bays as lead fatigue from expansion and contraction, rotten decking, split joints, over-fixing and poor detailing.

On porches and tiled bays, it's nearly always one of these.

  • Failed flashing where the roof meets the wall or the window sill above.
  • Rotten timber decking, often hidden until you push a finger through it.
  • Splits and cracks in old lead or felt.
  • Blocked or missing gutters, so water pours over the front edge.
  • Slipped or cracked tiles on small hipped bays.

Sometimes the roof's fine and the water's coming in through a cracked sill or knackered mastic round the window above.

That's why you get it looked at properly before anyone prices a new roof.

Repair or replace your bay roof?

A single split or a failed flashing can often be patched for £150 to £450, according to Bestbuilders.

If the deck's soft, it's soft, and no amount of new covering on top will fix that.

Replace it when the timber's gone, when it's leaking in more than one place, or when old felt has simply had its day.

If it's a flat bay that keeps leaking, our guide to flat roof leak repair covers finding the source first.

Want Leo to have a look?

Free survey, one fixed price in writing, and no hard sell. Wisbech, Peterborough and the Fens.

Book a free survey

Do you need permission to replace a porch or bay roof?

Usually not for a straight swap, but a few things are worth knowing.

Planning permission

The Planning Portal says re-roofing that doesn't materially change how a house looks usually doesn't need planning permission.

A new porch is permitted development if it's no more than 3m² in ground area, no more than 3m high, and not within 2m of a boundary with a road, under Class D of the 2015 permitted development order.

Those rights don't apply to flats and maisonettes, and an Article 4 direction can take them away in some streets.

In a conservation area or on a listed building, swapping lead for EPDM on a front bay could count as changing the look, so check with the council first.

Building regulations

East Suffolk Council's guidance says a porch at ground level under 30m² is exempt, as long as there's an external quality door between it and the house and the heating isn't run into it.

Bauder points out that under Approved Document L, replacing a flat roof's waterproofing membrane counts as a renovation, while laying over the old one is a repair.

On a small bay, ask your roofer whether insulation can sensibly go in, and see our guide to building regulations for a roof replacement for the thresholds.

What does a proper bay roof replacement involve?

Whatever the covering, a proper job follows the same basic order.

  1. Strip it. The old covering, flashings and fixings all come off, so you can see what you're dealing with.
  2. Check the timber. Anything soft or rotten gets cut out and replaced, not covered over.
  3. New deck. The Lead Lads' bay job went back with 18mm exterior-grade plywood, which is the sort of thing you want to hear.
  4. Underlay or prep. Lead goes on an underlay so it can move, and EPDM goes on a clean, dry, smooth deck.
  5. Lay the covering. Lead gets rolls and welted joints, and EPDM goes down as one sheet with proper edge trims.
  6. Flash the wall. New flashing where the roof meets the wall or the sill above.
  7. Finish off. Lead gets a coat of patination oil, gutters get checked, and the mess goes in the skip.

If someone wants to lay new felt straight over the old stuff without looking underneath, that's a bodge, and you'll be paying again in a few years.

How long does a bay or porch roof replacement take?

Bestbuilders says most bay roofs take half a day to two days, with felt quickest and lead slowest.

MyJobQuote says one to two days for felt, EPDM and fibreglass, and one to three days for slate and lead.

Bigger lead jobs take longer, and the Lead Lads' own Code 5 bay took about four days.

If there's a scaffold, add a day either side to put it up and take it down.

Bay and porch roofs in Peterborough and the Fens

We see a lot of bay and porch roofs round here, and they tend to fail in the same ways.

The older brick terraces in Peterborough and Wisbech often have lead or slate bays, and many are on their second or third set of patches.

Wisbech's Georgian Brinks and Peterborough city centre include conservation areas, so on a front bay there, check with the council before changing lead for anything else.

The 1960s to 80s bungalows and ex-council semis in March, Whittlesey, Chatteris and Spalding tend to have felt porch canopies, and a lot of them are past it.

Out here the land is flat and open, so the wind and driving rain hit front elevations hard, and flashings and edge trims take a beating.

The clay soils move as they wet and dry, and a porch on shallower footings can shift a little against the house, which opens up the flashing joint.

So when we price a porch or bay roof, we check the flashing, the wall joint and the gutter, not just the covering.

If you're looking for roofers in Peterborough or a roofer in Wisbech to sort a bay or porch, we cover Holbeach, Long Sutton, King's Lynn, Downham Market, Ely and the rest of the Fens too.

What to ask before you hire someone

  1. What's under the covering? Ask how they'll check the deck, and what happens to the price if it's rotten.
  2. What code of lead, or which membrane? A straight answer with a product name is a good sign.
  3. How will the wall junction be flashed? That's where most leaks start.
  4. Is the scaffold included? On a first-floor bay it can add hundreds.
  5. Is it one fixed price, in writing, with a guarantee? It should be.

Summary: porch and bay window roof replacement

A bay window roof replacement usually costs £350 to £3,500 in 2026, with felt and EPDM cheapest and lead dearest.

A porch roof runs from around £600 for a flat canopy to £3,500 or more for a pitched, tiled one.

Lead suits period houses and lasts decades, EPDM is the practical pick for flat bays and canopies, and tiles or slate suit little pitched roofs that match the house.

Most leaks come from flashings, rotten decks and water off the window above, so get it looked at properly before you pick a material.

If your bay or porch roof is letting water in anywhere round Peterborough and the Fens, book a free survey and Leo will give you one fixed price in writing.

Questions people ask

Is lead or EPDM better for a bay window roof?

Lead lasts longer and suits period houses, but it costs more and needs a skilled leadworker. EPDM is cheaper, seamless and quick to fit, and is the practical choice for most flat bays and porch canopies.

Can a bay window roof be repaired instead of replaced?

Often, yes. A single split or failed flashing can usually be patched, but if the timber deck underneath is rotten, the roof needs replacing.

Why does my bay window leak when it rains?

The usual causes are a failed flashing where the bay roof meets the wall, a split in the covering, or water getting in through the window sill or mastic above. A survey should check all three before anyone quotes for a new roof.

Do I need scaffolding to replace a bay window roof?

A ground-floor bay can sometimes be done from a tower or ladders, but a first-floor bay or a roof over a porch usually needs a scaffold, which 2026 guides put at around £150 to £600.

Can I put tiles on a flat porch roof?

Not on a flat roof, because tiles need a pitch to shed water. Changing a flat canopy to a pitched, tiled roof means building a new roof structure, which costs more.

Do you replace porch and bay roofs in Wisbech and King's Lynn?

Yes. Roofz covers Wisbech, Peterborough and the Fens, including March, Whittlesey, Chatteris, Spalding, Holbeach, Long Sutton, King's Lynn, Downham Market and Ely, and every job starts with a free survey and a fixed written price.