Rubber roofing cost in 2026 typically works out at around £55 to £140 per square metre for an EPDM flat roof, supplied and fitted.
The low end is a simple re-cover on a sound deck.
The top end is a full strip, new boards, trims and outlets.
For a single garage that's usually somewhere between about £875 and £2,800, and for a small rear extension roughly £1,650 to £5,000.
Insulate it as a warm roof over a heated room and you're looking at another £20 to £70 per m² on top.
EPDM rubber is the flat roof Leo fits most, but every figure here comes from published 2026 price guides, not our own price list.
How much does rubber roofing cost per m²?
EPDM stands for ethylene propylene diene monomer, which is why everyone just says rubber roof.
It comes as one big flexible sheet glued to the deck, so most house roofs end up with no joins at all.
Here's what the main UK guides say it costs per m².
| What's included | Typical price per m² | Source and date |
|---|---|---|
| Average rubber roof, fully installed | About £60 | MyJobQuote, Oct 2026 |
| EPDM fitted, including materials and labour | £55 to £75 | Less.co.uk, Oct 2026 |
| EPDM covering | £70 to £90 plus VAT (average £80) | Checkatrade price table |
| EPDM supplied and fitted | £80 to £140 | BestBuilders, Aug 2026 |
| Warm roof (insulated) on top of the above | Add £20 to £70 | BestBuilders and MyJobQuote, 2026 |
The gap between £55 and £140 is mostly down to what's included.
The cheaper figures usually assume the deck is sound and only the covering needs doing.
The dearer ones tend to include stripping the old roof, new boards, new trims, outlets and better access.
Bigger roofs work out cheaper per m², because the setting up and the trims get spread over more area.
MyJobQuote's figures show it, dropping from about £66 per m² on a 25 m² extension to about £41 per m² on a 30 m² double garage.
Rubber roof prices for garages, dormers and extensions
Here are typical 2026 project prices from two guides that measure slightly different things.
MyJobQuote gives an average installed price.
BestBuilders gives a wider supplied-and-fitted range that allows for more of the extras.
| Roof | Approx. size | MyJobQuote average (Oct 2026) | BestBuilders range (Aug 2026) |
|---|---|---|---|
| Dormer or bay | 5 to 8 m² | £520 (8 m²) | £1,200 to £2,200 |
| Garden office or outbuilding | 12 m² | £780 | Not given |
| Single garage | 15 m² | £875 | £1,500 to £2,800 |
| Rear extension | 25 to 35 m² | £1,650 (25 m²) | £2,500 to £5,000 |
| Double garage | 30 m² | £1,250 | Not given |
| Large extension or outbuilding | 40 to 60 m² | Not given | £4,500 to £8,000 |
BestBuilders also gives a worked example of £3,780 including VAT for a roughly 28 m² kitchen extension roof in Milton Keynes.
Checkatrade runs higher, at an average of £6,800 plus VAT for a complete new double garage roof in EPDM, though its table was last updated in 2024.
Bottom line: a small, simple garage at ground level sits at the bottom of these ranges.
A first-floor extension with a new warm deck sits at the top.
Garages get their own write-up in our garage roof replacement guide.
Roofz guide
Rubber roofing cost in 2026
EPDM flat roof prices, extras, lifespan and how it compares to fibreglass and felt
EPDM at a glance
£55-£140
Per m², supplied and fitted
+£20-£70
Per m² to insulate as a warm roof
30-50 yrs
Typical lifespan
1.2mm
Standard membrane thickness
Project prices (top of 2026 range)
How long each flat roof lasts (upper estimate)
Extras to budget for
- Labour: £250-£350 a day
- Rotten deck: £18-£35 per m²
- Trims and outlets: £150-£300 on a garage
- Skip: £220-£400
- First-floor access: £150-£800
- Contingency: 10-15% for hidden deck problems
How a rubber roof goes on
- Strip and check the old roof and deck
- Re-deck in OSB or plywood, never chipboard
- Relax the sheet for 20-30 minutes
- Glue the field with water-based adhesive, 150mm short of the edges
- Bond the edges with contact adhesive, then fit trims
EPDM vs fibreglass
EPDM rubber
- 15 m² garage: £1,200-£1,800
- Flexible single sheet
- No naked flame
- Adhesive needs 5°C+
Fibreglass (GRP)
- 15 m² garage: £1,350-£2,100
- Hard, walkable finish
- Resin needs 5°C+ and dry
- Repairs need colour matching
What extra costs come with an EPDM roof?
The rubber itself is often one of the smaller lines on the quote.
BestBuilders puts membrane and adhesive at about £250 to £450 for a single garage, out of a total of £1,500 to £2,800.
The rest is labour, boards, trims, access and whatever's hiding under the old felt.
- Labour: MyJobQuote puts roofers at £250 to £350 a day, and BestBuilders' worked example shows £1,220 for two fitters over three days.
- Rotten decking: BestBuilders calls this a common hidden cost, at about £18 to £35 per m² to replace.
- Insulation: a warm roof adds about £20 to £45 per m² (BestBuilders) or £30 to £70 per m² (MyJobQuote).
- Trims and outlets: about £150 to £300 on a garage, and £250 to £500 on a rear extension (BestBuilders).
- Skip: a medium skip is about £220 to £400 (MyJobQuote).
- Access: first-floor roofs can add £150 to £800 for scaffold or towers (BestBuilders).
MyJobQuote also suggests keeping 10 to 15% back for deck problems you can't see till the old roof's off.
Fair enough, though a proper survey beforehand takes a lot of the guesswork out.
Always check if the price includes VAT, because Checkatrade quotes plus VAT and plenty of guides don't say.
For every flat roof material side by side, see our flat roof replacement cost guide.
What affects the cost of a rubber roof?
The deck underneath
EPDM is glued down, so it needs a sound, smooth, dry base.
Roofing Superstore recommends plywood or OSB, and warns chipboard tends to crumble once it's been wet.
It also says old bitumen residue can damage the rubber, so felt either comes off or gets boarded over first.
Loads of 1970s and 1980s flat roofs round here have chipboard decks, and after years under tired felt they're often soft.
If it's rotten, it's rotten, and it has to come out.
Membrane thickness and brand
BestBuilders says 1.2mm EPDM is standard, while 1.5mm heavy-duty membranes and big-name brands cost more but carry longer guarantees.
For most garages and extensions, a good 1.2mm membrane fitted properly is plenty.
Insulation and Building Regulations
If the roof is over a heated room, replacing the covering can bring in Part L of the Building Regulations.
In England, renovating more than half a roof's surface can mean upgrading the insulation.
Luton Borough Council's Part L guide gives a target U-value of 0.16 W/m²K for a renovated flat roof, and says replacing a flat roof membrane will usually need an insulation upgrade.
Horsham District Council's re-roofing guidance says a roofer in a competent person scheme, such as the NFRC's Competent Roofer, can self-certify the work.
Falls, size and shape
IKO, citing BS 6229:2018, says flat roofs should be designed to a 1:40 fall so they finish no flatter than 1:80.
If your roof holds water, new firrings to fix the fall add cost but save a lot of grief later.
Rooflights, soil pipes, chimneys and walls on several sides all add detailing time.
Access and height
A bungalow extension or garage you can reach off a small tower is quick to set up.
A dormer or a first-floor roof over a kitchen needs proper scaffold, and BestBuilders says first-floor access can add £150 to £800 on its own.
Tight side passages, a conservatory in the way and nowhere to put a skip all push the price up too.
Rubber roofing vs fibreglass vs felt: how do they compare?
Here's how the three most common flat roof coverings compare in the 2026 price guides.
| Material | Price per m² | Typical lifespan | Good to know |
|---|---|---|---|
| EPDM rubber | £55 to £140 | 30 to 50 years | Single flexible sheet, cold-applied, easy to patch |
| Fibreglass (GRP) | £70 to £140 | 25 to 30 years | Hard and walkable, needs dry weather above 5°C to lay |
| Torch-on felt | £40 to £80 | 10 to 20 years | Cheapest upfront, shortest life |
Price ranges come from Less.co.uk, BestBuilders and Checkatrade, and lifespans from Less.co.uk and Checkatrade.
Like for like, the guides put EPDM slightly cheaper than GRP.
BestBuilders prices a 15 m² garage at £1,200 to £1,800 in EPDM against £1,350 to £2,100 in GRP.
Felt is cheaper again upfront, but over the life of the roof you could easily pay for it twice.
More in our guides to fibreglass roof cost and torch-on felt roofs.
Want Leo to have a look?
Free survey, one fixed price in writing, and no hard sell. Wisbech, Peterborough and the Fens.
How long does a rubber roof last?
A well-fitted EPDM roof is one of the longest-lasting flat roofs going.
Less.co.uk and Checkatrade both quote 30 to 50 years, and Roofing Superstore and Permaroof put the expected life at over 50.
Guarantees are shorter than that, as you'd expect.
Permaroof offers a 20-year material-only warranty when its trained contractors fit the membrane, and BestBuilders says 20 to 25 year guarantees are common.
Ask what's guaranteed, who by and for how long, and get it in writing.
What are the pros and cons of EPDM?
The good
- One sheet, often with no seams at all on a garage or extension.
- Flexible, so it copes with a building that moves a bit through the seasons.
- Glued down cold, so there's no naked flame on your roof.
- Easy to patch if something goes through it.
- Low maintenance, and Checkatrade describes it as moss and algae proof.
The not so good
- It's usually plain black, which not everyone likes.
- Sharp objects can puncture it, according to BestBuilders.
- Permaroof says it's fine to walk on for occasional maintenance, but regular foot traffic needs a proper walkway.
- Checkatrade notes it can shrink or crack in very cold weather, which is one reason a good fitter lets the sheet relax before gluing it.
- The bond depends on a clean, dry deck, so a rushed job on a damp morning won't last.
How is a rubber roof fitted?
Know the steps and you'll spot a quote that cuts corners.
- Strip and check. The old covering comes off and the joists and deck get inspected.
- Re-deck. New OSB or plywood goes down, with insulation and a vapour control layer for a warm roof.
- Relax the sheet. Roofing Superstore advises leaving the membrane laid out for 20 to 30 minutes so it doesn't wrinkle.
- Glue the field. Water-based adhesive goes on the main deck, stopping about 150mm short of the edges, and the sheet is rolled in from the middle.
- Bond the edges. Stronger contact adhesive goes on the 150mm perimeter strips and in the corners.
- Trims and upstands. Edge trims, wall upstands and outlets finish it off.
Permaroof says the adhesive needs at least 5°C and humidity no higher than 80%, and the membrane can't be bonded to a wet surface.
So EPDM is more forgiving than fibreglass, but a frosty, foggy Fenland morning still isn't the day to lay it.
The grumpy rain cloud knows that, which is why it likes to turn up at 8am on glue day.
A decent roofer checks the deck is bone dry before a drop of adhesive goes down, and walks away if it isn't.
Rubber roofing in Peterborough, Wisbech and the Fens
Roofing in the Fens is a bit different, and flat roofs take the brunt of it.
The land round Wisbech, March, Chatteris, Whittlesey and Downham Market is flat and wide open.
Wind gets a long run at your roof, and what it finds is a poorly bonded edge.
That's why the perimeter bond and the trims matter more round here than the brand name on the roll.
Clay soils shrink in dry summers and swell in wet winters, and buildings move slightly with them, which suits a flexible rubber sheet.
Across Peterborough, Spalding, Holbeach and King's Lynn there are loads of 1960s to 1980s bungalows, ex-council semis and flat-roof garages still on their original felt or a tired overlay.
Most of those are ideal for EPDM.
The older brick terraces in Peterborough and Wisbech often have flat-roofed back offshoots, where the upstand into old brickwork needs doing properly.
In a conservation area, like Wisbech's Georgian Brinks or Peterborough city centre, check with the council before changing how a visible roof looks.
If a garage has a corrugated cement sheet roof from before 2000, it may contain asbestos, so don't cut, drill or jet wash it.
Sheffield City Council's guidance notes asbestos cement was commonly used on garages and needs proper information, instruction and training to remove.
If you're after rubber roofing in Peterborough or a roofer in Wisbech, that's exactly what we do.
When should you repair a rubber roof instead of replacing it?
Because EPDM is one sheet, a single puncture or lifted edge can usually be repaired.
MyJobQuote puts minor rubber roof repairs at around £50 to £150.
Replacement makes more sense if the deck's gone soft, the roof ponds badly, or the old felt underneath has failed across most of it.
Our flat roof leak repair guide covers finding a leak and deciding what to do.
Can you fit a rubber roof yourself?
DIY EPDM kits are everywhere, and on a small, low shed a handy DIYer can make a decent job of one.
On a garage, extension or dormer, the sums aren't as good as they look.
A garden shed is one thing, but a garage joined to your house, with an upstand into the brickwork, is another.
Checkatrade points out DIY roofing carries real risks, falls from height being the obvious one.
The bigger money risks are the bits the kit doesn't cover: a rotten deck, the wrong falls, or a weak edge bond that lets the wind under the sheet.
Manufacturer warranties are often tied to approved or trained installers too, as Permaroof's 20-year material warranty is.
If you do have a go, work off a proper tower or scaffold, not a ladder, and never on your own.
How do you look after a rubber roof?
EPDM needs very little looking after, which is half the point.
- Check it in spring and autumn, and after a big storm, as Roofing Superstore suggests.
- Sweep off leaves, moss off nearby tiles and anything sharp, with a soft brush.
- Clear the gutters and outlets so water doesn't sit on the roof.
- Look for lifted edges, loose trims and small cuts or punctures.
- Keep ladders, garden furniture and pressure washers off it.
Spot damage, get it patched quick, because water getting under the sheet is what rots the deck.
A patch needs a clean surface and a good overlap, and Roofing Superstore recommends at least 50mm of sound membrane around the damage.
How to choose a rubber roofer
- Get a fixed, itemised price in writing. It should list the deck, membrane thickness, adhesive, trims and any insulation.
- Ask about the deck. Are they stripping and re-boarding, or overlaying, and why?
- Ask about Building Regulations. If it's over a heated room, how is Part L being handled and signed off?
- Ask what's guaranteed. Materials and workmanship are often guaranteed separately.
- Be wary of very cheap quotes. They often assume a sound deck that turns out not to be.
Leo does a free survey, checks the deck and the falls, and gives you one fixed price in writing with a written guarantee.
No surprises on the day.
Rubber roofing cost: the summary
An EPDM rubber roof typically costs £55 to £140 per m² in 2026, depending on how much of the roof needs doing.
A single garage usually comes in between £875 and £2,800, and a small extension between about £1,650 and £5,000.
Insulation, rotten boards and access are the extras most likely to move the price.
With a lifespan of 30 to 50 years or more, EPDM is often the best value flat roof over its whole life.
Want a fixed price for your roof, book a free survey with Leo.
Questions people ask
Is a rubber roof cheaper than felt?
Usually not upfront, as 2026 guides put torch-on felt at around £40 to £80 per m² against roughly £55 to £140 for EPDM. Felt typically lasts 10 to 20 years, though, so EPDM often costs less over the life of the roof.
Can EPDM be laid over an existing felt roof?
Not directly, because bitumen residue can damage the rubber. Felt either needs stripping or covering with new boards first, and only if the deck and structure underneath are sound.
Can you walk on a rubber roof?
Yes, for occasional maintenance, as long as you avoid shoes with stones or sharp bits in the soles. If you need regular access, a proper walkway or pavers on rubber supports should be fitted.
Can a rubber roof be fitted in winter?
Often, yes, because it is cold-applied, but the adhesive generally needs at least 5°C and a dry deck. Frost, fog and drizzle can all delay work.
What thickness of EPDM should I use?
1.2mm is the standard for most domestic garages and extensions. Heavier 1.5mm membranes cost more and can come with longer guarantees.
Do you fit rubber roofs in Wisbech, Peterborough and King's Lynn?
Yes. Roofz covers Wisbech, Peterborough and the Fens, including March, Whittlesey, Chatteris, Ely, Spalding, Holbeach, Long Sutton, King's Lynn, Downham Market, Market Deeping, Stamford and Huntingdon.
Sources
- MyJobQuote - Rubber roofing cost (updated October 2026)
- Checkatrade - Rubber roofing cost guide
- BestBuilders - EPDM flat roof cost (updated August 2026)
- BestBuilders - EPDM vs fibreglass flat roof cost 2026
- Less.co.uk - Fibreglass roof cost, with EPDM and felt comparison (updated October 2026)
- Checkatrade - Flat roof replacement costs
- Roofing Superstore - The complete guide to EPDM roofing
- Permaroof - Frequently asked questions
- IKO - Minimum drainage falls for a flat roof (BS 6229:2018)
- Luton Borough Council - Part L and F extensions and alterations booklet
- Horsham District Council - Guidance for re-roofing projects
- Sheffield City Council - Removal of asbestos from your home
Prices are guide figures from the sources above and vary by job. Your free survey gives one fixed price in writing.



