Flat roofs

Fibreglass Roof Cost: 2026 GRP Prices and How It Compares to EPDM

What a GRP fibreglass flat roof really costs in 2026, what's extra on the quote, and whether it beats EPDM rubber for your roof.

By the Roofz team8 November 202611 min read

Ink and watercolour drawing: Leo the roofer wearing gloves rolling resin onto a fibreglass flat roof with a long-handled roller
Leo on the job.

The average fibreglass roof cost in 2026 is roughly £70 to £140 per square metre for a new GRP covering on a fresh deck, going by the main UK price guides.

Want it fully insulated as a warm roof that meets today's Building Regulations?

Then the guides put it nearer £210 to £270 per m².

In real money, that's about £1,050 to £2,100 for a typical single garage, and £1,400 to £3,500 for a small rear extension before any insulation.

Below is where those numbers come from, what pushes them up, and how fibreglass stacks up against EPDM rubber.

How much does a fibreglass roof cost per m²?

Fibreglass, GRP (glass reinforced plastic), resin roof: it's all the same thing.

What you pay mostly comes down to how much work sits under that grey topcoat.

Here's how the published 2026 figures line up.

What's includedTypical price per m²Source and date
GRP covering only, on a sound existing deck£35 to £45MyJobQuote, Oct 2026
Strip, new deck and GRP, fitted£70 to £100 (average £85)Less.co.uk, Oct 2026
GRP supplied and fitted£90 to £140BestBuilders, Aug 2026
GRP flat roof replacement£95 to £120 plus VATCheckatrade price table
Fully insulated GRP warm roof£210 to £270MyJobQuote, Oct 2026

That spread looks daft, but it's mostly about what's included.

The cheapest figure is just resin, glass mat and topcoat going onto boards that are already there and sound.

The dearest figure covers stripping the old roof, a new deck, rigid insulation, a vapour control layer, trims and the GRP.

Less.co.uk also gives regional averages, and the East of England comes in at about £90 per m², a touch above the middle.

So when two quotes for the same roof are miles apart, first question: what's actually in it?

What does a fibreglass roof cost for a garage, porch or extension?

Per m² is handy, but you want a figure for your roof.

These are the project prices the guides published in 2026, rounded and grouped by roof type.

RoofApprox. sizeNew GRP covering (fitted)Fully insulated warm roof
Porch5 m²£400 to £800Rarely needed
Dormer8 to 10 m²£650 to £1,200£2,100 to £2,700
Single garage15 m²£1,050 to £2,100Usually not required
Rear extension20 to 25 m²£1,400 to £3,500£4,200 to £5,400 (20 m²)
Large flat roof40 m²£2,800 to £5,600Survey needed

Covering figures are from Less.co.uk (October 2026) and BestBuilders (August 2026), and the insulated figures are from MyJobQuote (October 2026).

A detached, unheated garage usually doesn't need insulating, so garages sit at the cheap end.

A roof over a heated kitchen or bedroom is a different job, because Building Regulations may make you insulate it when the covering's replaced.

There's more on garages in our garage roof replacement guide.

Roofz guide

Fibreglass roof cost in 2026

What a GRP flat roof costs, what's extra, and how it compares to EPDM and felt

The headline numbers

£70-£140

Per m², new GRP covering fitted

£210-£270

Per m², fully insulated warm roof

25-30 yrs

Typical GRP lifespan

5°C

Minimum temperature to lay resin

Typical project prices (top of range, GRP covering)

Porch, 5 m²£400-£800
Dormer, 8-10 m²£650-£1,200
Single garage, 15 m²£1,050-£2,100
Rear extension, 20-25 m²£1,400-£3,500
Large flat roof, 40 m²£2,800-£5,600

Common extras on a GRP quote

  • New decking: £15-£25 per m²
  • Insulation upgrade for Part L: £20-£40 per m²
  • Edge trims: £15-£25 per metre
  • Scaffold or tower: £200-£600
  • Skip hire: £200-£350
  • Labour: around £200-£275 a day

GRP vs EPDM vs felt

Fibreglass (GRP)

  • £70-£140 per m²
  • 25-30 years
  • Hard, walkable surface
  • Needs dry weather above 5°C

EPDM rubber

  • £55-£120 per m²
  • 30-50 years
  • Flexible single sheet
  • Easy patch repairs

Torch-on felt

  • £40-£80 per m²
  • 10-20 years
  • Cheapest upfront
  • Shortest lifespan of the three

How a GRP roof goes on

  1. Strip the old roof and check joists and boards
  2. Re-deck with 18mm OSB3, plus insulation if it's a warm roof
  3. Fix trims around the edges
  4. Laminate with resin and 450g glass mat
  5. Topcoat within 24 hours to seal it

ROOFZ - roofz.co.uk

Sources: MyJobQuote (Oct 2026), Less.co.uk (Oct 2026), BestBuilders (Aug 2026), Checkatrade, MyBuilder, EC Fibreglass Supplies, FibreGlassDirect. Prices are guide ranges; a free Roofz survey gives a fixed figure.

Share this infographic

Free to use on your own site. Copy the code below and paste it into your page.

What extra costs should you budget for?

The headline price per m² is never the whole story.

These are the extras that turn up on fibreglass quotes, with 2026 figures from Less.co.uk unless stated.

  • Replacing rotten decking: about £15 to £25 per m².
  • Insulation upgrade to meet Part L: about £20 to £40 per m² (MyBuilder gives the same range).
  • Edge trims: about £15 to £25 per linear metre.
  • Scaffold or tower: about £200 to £600 for a typical house.
  • Skip hire: about £200 to £350.
  • Fascia and soffit renewal: about £150 to £400.
  • Labour: MyJobQuote puts roofers at around £200 to £275 a day.

Stripping the old roof is the cost that moves most, because nobody knows what's under the felt till it's off.

BestBuilders reckons tear-off and deck checks add roughly £20 to £40 per m².

MyJobQuote quotes £60 to £90 per m² for full removal on bigger jobs.

Watch the VAT too.

Checkatrade's figures are plus VAT, most other guides don't say, so always ask if the 20% is in.

For a full flat roof budget across every material, see our flat roof replacement cost guide.

What makes one fibreglass roof dearer than another?

Two roofs the same size can come out hundreds of pounds apart.

Here's why.

The state of the deck

GRP is only as good as the boards under it.

EC Fibreglass recommends 18mm OSB3 boards, tongue and groove, laid at right angles to the joists.

If the old chipboard's gone soft after years under a leaky felt roof, it all comes up.

No point laying a good roof on a rotten deck.

Insulation and Building Regulations

Under Approved Document L in England, renovating more than half a roof's surface can mean upgrading its insulation.

Luton Borough Council's Part L guide gives a target U-value of 0.16 W/m²K for a renovated flat roof.

The same guide says replacing a flat roof membrane will usually need an insulation upgrade.

That's why a warm roof over a living space costs a lot more than a garage.

A roofer registered with a competent person scheme, like the NFRC's Competent Roofer, can self-certify the work, so you don't have to deal with Building Control yourself.

Our guide to building regulations for roof replacement sets it out plainly.

Falls and drainage

A "flat" roof should never be dead flat.

IKO, citing BS 6229:2018, says flat roofs should be designed to a 1:40 fall so they finish no flatter than 1:80 once building tolerances are allowed for.

If your old roof holds puddles, new firrings to sort the fall add time and materials.

Trims, upstands and awkward bits

Every edge, wall, rooflight and soil pipe needs detailing.

A plain rectangle with drip trims on three sides is quick.

A dormer with cheeks, a skylight and a flashing into brickwork takes a lot longer.

Access and the weather

Scaffold adds cost, and so does a job that has to sit and wait for the weather.

Fibreglass needs reasonably warm, dry conditions to cure, which we'll get to.

Fibreglass roof cost vs EPDM: which is better value?

We get asked this more than anything.

Straight answer: both are good flat roofs when they're fitted properly.

Here's how the 2026 price guides compare them, with felt in for context.

MaterialPrice per m² (2026 guides)Typical lifespanBest for
Fibreglass (GRP)£70 to £14025 to 30 yearsRoofs you walk on, neat detailing, choice of colour
EPDM rubber£55 to £12030 to 50 yearsMost homes, garages and extensions; easy repairs
Torch-on felt£40 to £8010 to 20 yearsTight budgets and like-for-like swaps

Ranges come from Less.co.uk, BestBuilders and Checkatrade, which is why they're wide.

Like for like, every guide we checked puts GRP a bit above EPDM per m².

BestBuilders, for example, prices a 15 m² garage at £1,200 to £1,800 in EPDM and £1,350 to £2,100 in GRP.

Where fibreglass wins

  • It sets rock hard, so it takes regular foot traffic, which suits balconies and roofs you need to get onto.
  • It's seamless, with a topcoat that can be coloured.
  • Moulded trims give it crisp, tidy edges.

Where EPDM wins

  • It's one flexible sheet, so it copes with movement in the building and the deck.
  • It's cold-applied with no naked flame, and it's less fussy about the weather on the day.
  • Patch repairs are simple, while a GRP repair means re-laying a section and colour matching it.
  • The guides give it a longer life, at 30 to 50 years.

EPDM is what we fit most at Roofz, but fibreglass is a good roof, no question.

If you need a hard surface to walk on, GRP is often the better shout.

For a garage or extension nobody walks on, EPDM usually gives you more years for your money.

The EPDM side is in our rubber roofing cost guide.

How long does a fibreglass roof last?

A well-laid fibreglass roof should give you at least 25 years.

MyJobQuote notes BBA-certified GRP systems are rated for a minimum of 25 years, and Less.co.uk and BestBuilders both quote 25 to 30.

The big "if" is the lay-up.

BestBuilders warns a rushed job can craze or delaminate, and GRP laid on a deck that flexes gets hairline cracks.

That's not the material's fault, it's the workmanship.

The lad on the roller matters more than the brand on the tin.

Want Leo to have a look?

Free survey, one fixed price in writing, and no hard sell. Wisbech, Peterborough and the Fens.

Book a free survey

How is a fibreglass roof fitted?

Knowing the steps helps you see what you're paying for, and spot a quote that skips one.

  1. Strip and inspect. The old covering comes off and the joists and boards get checked for rot.
  2. Re-deck. New boards go down, plus insulation and a vapour control layer if it's a warm roof.
  3. Fix the trims. Drip trims and raised edge trims go round the perimeter so water runs where it should.
  4. Lay the laminate. Resin is rolled onto the deck and a glass mat (EC Fibreglass suggests 450g per m² chopped strand mat) is wetted through and rolled out to get the air out.
  5. Topcoat. Once the laminate has started to cure, a coloured topcoat seals it, and EC Fibreglass says this should go on within 24 hours.

MyJobQuote says a fibreglass roof takes one to five days to fit, depending on size and how fiddly the details are.

Can you fit a fibreglass roof in winter?

Not easily, and that's worth knowing if you're booking work in the Fens.

EC Fibreglass and FibreGlassDirect both say not to use the resin or topcoat below 5°C, because it won't cure properly.

They also say don't start if rain's forecast, and get the roof covered straight away if a shower turns up mid-job.

EC Fibreglass also advises against topcoating after about 2pm in winter unless it's a clear, bright day, because the evening damp and cold slow the cure.

Some makers now sell cold-cure resins for cooler months, but even those have limits.

In practice, GRP round here is mostly a spring-to-autumn job, and a winter leak may need a temporary fix first.

EPDM, being glued down cold, gives a bit more leeway on dates, though the deck still has to be clean and dry.

A roofer happy to lay GRP on a frosty December morning is a roofer to avoid.

Fibreglass roofs in Peterborough, Wisbech and the Fens

Roofing in the Fens has its own quirks, and flat roofs feel them first.

The land round Wisbech, March, Chatteris and Whittlesey is flat and open, so the wind gets a long run-up and finds any loose edge trim.

Clay soils across the area shrink in dry summers and swell in wet winters, and buildings move a little with them.

A rigid GRP roof is fine on a stiff, well-built deck, but it's less forgiving of movement than a flexible rubber sheet.

There are loads of 1960s to 1980s bungalows, ex-council semis and flat-roof garages across Peterborough, Spalding, Holbeach and King's Lynn, many still on tired felt.

Plenty of those are prime candidates for GRP or EPDM.

Older brick terraces in Peterborough and Wisbech often have small flat-roofed back additions and dormers, where neat GRP detailing against old brickwork really earns its keep.

If you're in a conservation area, such as Wisbech's Georgian Brinks or Peterborough city centre, check with the council before changing how a visible roof looks.

And if a garage roof is corrugated cement sheet from before 2000, it may contain asbestos, so don't drill, cut or jet wash it.

Sheffield City Council's guidance notes asbestos cement was commonly used on garages and should only be removed with the right information, instruction and training.

Get it checked before any work starts, because it changes the price and the method.

Looking for a fibreglass roof in Peterborough or a roofer in Wisbech who'll tell you straight whether GRP or rubber suits your roof?

That's our patch.

How to tell if your fibreglass roof needs repair or replacement

Fibreglass usually gives you warning before it actually leaks.

  • Fine cracks in the topcoat, often round edges and trims.
  • Soft or bouncy spots when you press the deck, which means rotten boards underneath.
  • Puddles still there two days after rain.
  • Trims lifting or coming away from the edge.
  • Stains on the ceiling below, especially near walls.

Small cracks can often be repaired.

MyJobQuote puts professional GRP repairs at around £150 to £600, and MyBuilder quotes £100 to £300 for minor work.

If the deck's soft over a big area, patching just buys time, because the problem is underneath.

Our flat roof leak repair guide goes through the repair or replace decision.

Is a cheap fibreglass quote worth it?

Sometimes, if it's honest about what it covers.

A covering-only price of £35 to £45 per m², which is what MyJobQuote gives, is fair for laying GRP on a deck that's genuinely sound.

The trouble starts when that price gets quoted for a roof that needs stripping and re-boarding.

Either the extra turns up on the final bill, or the new resin goes straight over soft boards.

That second one is a bodge, and BestBuilders is clear that GRP on a flexing deck cracks.

So a cheap quote is only cheap if the roof underneath is fine, and only a proper look at the deck tells you that.

How to choose a fibreglass roofer

So much rides on the lay-up that picking the right roofer matters more than knocking a few quid off the quote.

  1. Get a written, itemised quote. It should list the deck, insulation, number of glass layers, trims and topcoat.
  2. Ask which system they use. A named, certified system is easier to check than "resin and matting".
  3. Ask about the deck. Supplier guidance recommends 18mm OSB3, and a good roofer will tell you what they're fitting.
  4. Ask about Building Regulations. If it's a heated room, who's handling Part L and how will it be signed off?
  5. Get the guarantee in writing. Know what it covers and for how long.
  6. Ask when they plan to lay it. Dry weather above 5°C, or they're cutting corners.

If a roofer won't put any of that in writing, that tells you all you need to know.

Leo will come out for a free survey, check the deck and the falls, and give you one fixed price in writing.

He'll also tell you honestly whether GRP or EPDM suits your roof better.

Fibreglass roof cost: the short version

A new fibreglass flat roof typically costs £70 to £140 per m² in 2026, or around £210 to £270 per m² fully insulated.

A single garage usually lands between £1,050 and £2,100, and a small extension between £1,400 and £3,500 before insulation.

GRP costs a bit more than EPDM, lasts around 25 to 30 years, and is the one to pick if you need a hard surface to walk on.

It needs dry weather above 5°C, a stiff deck and a careful installer.

Want a straight price for your roof, book a free survey and Leo will come and have a look before that rain cloud does.

Questions people ask

Is fibreglass cheaper than EPDM for a flat roof?

Usually not. 2026 price guides put GRP slightly above EPDM per m², for example around £1,350 to £2,100 for a 15 m² garage in GRP against £1,200 to £1,800 in EPDM.

Can you put fibreglass over an existing felt roof?

It is generally not recommended, because GRP needs a clean, stiff and dry deck to bond to. Most roofers will strip the felt and lay new boards so they can check for rot underneath.

Do I need building regulations approval for a new fibreglass roof?

Replacing more than half of a roof's surface in England can bring in Part L, meaning the insulation may need upgrading, usually to a U-value of 0.16 W/m²K on a heated room. A roofer in a competent person scheme can self-certify the work.

How long does it take to fit a fibreglass roof?

Most domestic GRP roofs take one to five days, depending on size, detailing and whether the deck needs replacing. Dry weather above 5°C is needed for the resin to cure.

Can a fibreglass roof be repaired?

Yes, cracks and small damaged areas can be ground back and re-laminated, then topcoated to match. Professional repairs are typically priced at around £100 to £600 depending on size.

Do you fit fibreglass and rubber roofs in Wisbech and Peterborough?

Yes. Roofz covers Wisbech, Peterborough and the Fens, including March, Whittlesey, Chatteris, Ely, Spalding, Holbeach, Long Sutton, King's Lynn, Downham Market, Market Deeping, Stamford and Huntingdon.